|
|
 |
The Carlo T/30 is a popular quick Change Hand-piece for use only with 2.35mm burs. A lever action on the hand-piece body is all that is required to change accessories.
The T-30 has a moulded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication.
Supplied exclusively for use with 2.35mm shank burs. 143mm long, 28.5mm dia. (centre), 9.5mm dia. (front taper), Weight 4 oz.
Made in Italy.
| |
Code | | Connection |
Price ex. GST |
|
| |
HP1050 | | American (Ball bearing) |
$210.00 |
 | |
| |
HP1000 | | European (Slip Joint) |
$210.00 |
| |
|
T/30 Common Replacement Parts.
| |
Code | | Part |
Price ex. GST |
|
| |
SP180/R/01 | | Plastic Nose Cone |
$8.00 |
| |
| |
SP180/18A | | Felt washer for inside nose cone |
$1.80 |
| |
| |
SP180/40A | | T/30 Rear Bearing |
$10.00 |
| |
|
 |
Quick release lever allows rapid changing of all burs & accessories with 2.4 mm shanks. Slim body for precise control. Faro brand - highest quality Italian construction.
Length 15.4mm, Dia. 16.6mm. Weight 4.55oz
| |
Code |
Price ex. GST |
|
| |
HP2000 |
$310.00 |
| |
|
 |
Same as the No. 10, with the addition of a Duplex Spring. For use only with 2.35mm burs. The spring provides extra flexibility to the hand-piece. Duplex springs are subject to breakage.
We recommend that only experienced users of flex shaft tools whose work demands the added flexibility consider purchasing this style hand-piece. For most users, the "straight" hand-piece is the preferable solution.
For use only with 2.35mm burs. 273mm long, 16.6mm dia. Weight 5.95 oz.
| |
Code |
Price ex. GST |
|
| |
HP3100 |
$680.00 |
| |
|
 |
No. 10 is a Quick Change Hand-piece featuring a slim grip and pre-lubricated ball bearings that do not require any lubrication.
For use with only 2.35mm burs. A rotating lever action is all that is required to change accessories.
Exclusively for use with 2.35mm shank burs. 185mm long, 16.5mm dia. Weight 4.55 oz.
| |
Code |
Price ex. GST |
|
| |
HP3050 |
$630.00 |
| |
|
 |
Collet type chuck hand-piece with a slender, comfortable design and tapered grip.
Comes with 2.35mm and 3.18mm collets, pin and chuck wrench.
133.5mm long. 19.0mm diameter(centre). 12.7mm diameter(taper) Weight 3 oz.
| |
Code |
Price ex. GST |
|
| |
HP3400 |
$145.00 |
| |
|
 |
Slip joint connection for use with European-style flexible shaft machines. Comes with 2.35mm and 3mm collets.
This hand-piece is not interchangeable with Foredom "Quick Disconnect" style handpieces.
133.5mm long. 19.0mm diameter(centre). 12.7mm diameter(taper). Weight 3 oz.
| |
Code |
Price ex. GST |
|
| |
HP3450 |
$145.00 |
| |
|
 |
Foredom's most popular hand-piece features a #0 geared 3-jaw Jacobs® Chuck. It accepts any size accessory shank or drill bit up to 4mm.
Pre-lubricated ball bearings require no maintenance.
Comes with a ergonomic chuck key. |
 |
Slip joint connection for use with European-style flexible shaft machines.
This hand-piece is not interchangeable with Foredom "Quick Disconnect" style handpieces.
| |
Code |
Price ex. GST |
|
| |
HP3350 |
$140.00 |
| |
|
 |
Slip joint connection for use with European-style flexible shaft machines.
This hand-piece is not interchangeable with Foredom "Quick Disconnect" style handpieces.
5-1/2" long, 51/64" dia., wt. 2.95 oz., ship wt. 5.2 oz.
| |
Code |
Price ex. GST |
|
| |
HP3550 |
$285.00 |
| |
|
 |
Collet-type chuck hand-piece with slim design and chuck guard sleeve that protects fingers when working close and slides back when changing collets and accessories.
Comes with 2.35mm and 3.18mm collets, and set of chuck wrenches.
| |
Code |
Price ex. GST |
|
| |
HP3000 |
$170.00 |
| |
|
 |
The Foredom Duplex Connection provides extra flexibility in the hand-piece itself where more precise control for delicate work is required. The spring drive is of special steel, double wound, tubular construction and is protected by a flexible spring cover.
Collet-type chuck hand-piece with slim design and chuck guard sleeve that protects fingers when working close and slides back when changing collets and accessories.
Comes with 2.35mm and 3.18mm collets, and set of chuck wrenches.
| |
Code |
Price ex. GST |
|
| |
HP3020 |
$270.00 |
| |
|
 |
Slip joint connection for use with European-style flexible shaft machines. Comes with 2.35mm and 3mm collets.
This hand-piece is not interchangeable with Foredom "Quick Disconnect" style handpieces.
5-1/2" long, 5/8" dia., wt. 3.5 oz., ship wt. 4.65 oz.
| |
Code |
Price ex. GST |
|
| |
HP3010 |
$120.00 |
| |
|
 |
Our most popular hand-piece for all-around use. Adjustable chuck accommodates shank sizes from 0 to 5/32" (4 mm).
Includes chuck key.
Genuine Grobet USA brand!
| |
Code | | Connection |
Price ex. GST |
|
| |
HP3301 | | American (Ball bearing) |
$99.00 |
| |
|
Foredom Handpiece Common Replacement Parts
| |
Code | | Part | | Quantity |
Price ex. GST |
|
| |
SP48 | | Replacement Shaft Catch Ball | | Single |
$4.50 |
| |
|
|
SP43 | | Foredom Sheath Catch Spring | | Single |
$5.00 |
| |
|
|
SP31002 | | Foredom #20 Felt Washer | | Sold individually |
$1.20 |
| |
|
|
SP3910 | | Foredom Duplex Spring | | Single |
$22.00 |
| |
|
|
SP3910-12 | | Foredom Duplex Spring | | Pack of 12 |
$237.60 |
| |
|
|
SP61 | | Foredom Bearing for #30 Handpiece | | Single |
$11.50 |
| |
| |
SP090.010 | | Foredom Front Bearing H.10 |
$62.00 |
| |
|
