|
|
|
|
|
Home  Tools & Equipment Watch Supplies and Tools Case Holders, Opening and Closing |
|
|
 |
For cleaning balance pivots, train wheel pivots, removing finger prints and stains from plates, bridges, dials, hands; removing excess oil from watch jewels and taking out broken pivots from the jewels. |
 |
Drill Jewellery Brass Wheel. A traditional tool, commonly used by professionals, but requires an acquired skill.
Keep twisitng the strip around the shaft and press down with the wooden bar.
Holds Drills sizes 0.30mm to 2.00mm
| |
Code |
Price ex. GST |
|
|
|
DR126 |
$30.00 |
 | |
|
 |
Soft Rubber Dust Blower.
| |
Code |
Price ex. GST |
|
|
|
WTC322 |
$8.00 |
| |
|
 |
Oilers Set of 3
| |
Code |
Price ex. GST |
|
| |
WTC981 |
$9.00 |
| |
|
 |
Removes fine, light, and medium deep scratches from glass watch crystals
Achieve professional results with high-tech Diamond Polishing Technology
Simple 2-Component-System:
Step 1 - the High-Tech Diamond “Repair-Polish“ removes the scratches
Step 2 - the Diamond “Finishing-Polish“ polishes on high gloss
Suitable for all glass qualities. Also suitable for sapphire glass.
Easy and effective application,
Eliminates expensive repairs,
Conserves value,
Versatile use: watches, smartphones, windows, and other glass items.
Repair Watch Glass and Cell Phone Screens.
Removes fine, light and medium deep scratches from glass.
Easy DIY application.
The content is sufficient for approx. 30-40 applications.
All Inclusive Kit: 1 Repair dispenser, 1 finishing dispenser, 1 polishing rod, and 2 x 6 polishing strips
| |
Code |
Price ex. GST |
|
| |
WTC47006 |
$32.00 |
| |
|
 |
The No. 1 Repair Polish for Acrylic Watch Crystals
• Acknowledged globally for reliability
• TUV certified for proven effectiveness
• Plastic Deformation Technology
• Superior professional results
• Easy and quick application
• Saves expensive repairs
• Provides value retention
Removes scratches from plastic/acrylic watch crystals.
This is a tried and tested product, which has proven its worth over the long haul!
If your crystal has heavy scratches, you may need to use a deep scratch remover, such as Brasso, or even a fine wet and dry paper (500 or 1000grit) prior to a final polish with Polywatch.
Instructions for use: Apply PolyWatch Crystal Polish only to plastic/acrylic watch crystals. Polish the scratched areas with heavy pressure for 2-3 minutes with a clean, soft cotton cloth. Wipe off residue and give a final polish with a clean soft cotton cloth. Repeat application as necessary for deep scratches.
ATTENTION: ONLY SUITABLE FOR PLASTIC/ACRYLIC WATCH CRYSTALS.
| |
Code |
Price ex. GST |
|
| |
WT47002 |
$21.50 |
| |
|
 |
Easily punch holes through leather, textiles, plastic.
Creates 6 different hole sizes: 2, 2.5, 3, 3.5, 4, 4.5mm.
Punch sizes are clearly labeled.
Locking mechanism.
Grasp the punch wheel and rotate it counter-clockwise to move the desired punch into position.
Covered compartment collects removed pieces.
Less mess while you work!
Spring action handles reduce hand strain
| |
Code |
Price ex. GST |
|
| |
WTB200 |
$45.00 |
| |
|
 |
For Bell and Case Fitting (Assorted Packet of 100 Pieces)
| |
Code |
Price ex. GST |
|
| |
WT567 |
$12.00 |
| |
|
 |
Features a miniature pin vice and 12 tiny broaches made of high carbon cutting steel. Broaches are five-sided for enlarging holes and range from .05 .55mm. Made in Germany.
| |
Code |
Price ex. GST |
|
| |
MI14000 |
$44.00 |
| |
|
 |
| |
Code |
Price ex. GST |
|
| |
IND0348 |
$19.00 |
| |
|
 |
| |
Code |
Price ex. GST |
|
| |
WTB7500 |
$9.00 |
| |
|
 |
| |
Code |
Price ex. GST |
|
|
|
WTC1754 |
$2.00 |
| |
|
 |
For threading fine screws and wire. Taps allow you to thread the matching holes for the die plate.
| |
Code | | Description |
Price ex. GST |
|
|
|
MI13550 | | Tap and Die Set in Box |
$60.00 |
| |
|
|
MI13500 | | Tap and Die Set Only |
$50.00 |
| |
|
|
Watch Screws Pkt 250 w Tray.
Only for Wrist watch movements, Quartz Mechanical and backs |
|
|
|
| © 2008 RegalCastings Ltd. | Sitemap | Links | Terms and Conditions | Contact Us |
